Great Southern GardensGarden journal and licence directory
  1. Home
  2. Garden notes
  3. How high can a retaining wall be before it needs approval in Queensland?

Garden notes ยท Approvals

How high can a retaining wall be before it needs approval in Queensland?

One metre is the figure everyone quotes. Three other conditions travel with it.

In Queensland a retaining wall can be built without building approval only if the wall and what it holds back total no more than one metre above natural ground, it stands at least 1.5 metres from any building or other retaining wall, nothing loads the ground behind it, and it is not part of a pool fence. Fail any one of those and a building certifier has to approve it.

Those four conditions are how Brisbane City Council sets out the exemption, which it traces to Schedule 1 of the Building Regulation 2021. The same tests appear in other councils' guidance in slightly different words, because the regulation is statewide.

The four tests, one at a time

Height

The measurement is the total height of the wall and the fill or cut it retains, taken from the natural ground surface. A 900 millimetre sleeper wall with 300 millimetres of soil mounded behind the top course is a 1.2 metre wall for this purpose.

Distance

Terracing is where people come unstuck. Two 800 mm walls a metre apart each pass the height test and both fail the distance test.

The wall must be at least 1.5 metres from a building or another retaining wall. Stepped terraces on a steep block are the common trap: each tier may be low, but tiers set closer than 1.5 metres act on one another and need approval.

Surcharge

A surcharge is extra load on the soil the wall supports. Moreton Bay's council gives the plain examples: a driveway, footings, structures. If any of these sits over what the regulation calls the zone of influence, the wall needs approval at any height. A low wall beside a carport slab is a different engineering problem from the same wall holding a lawn.

Pool fences

A wall that forms part of a pool barrier is assessed under the pool safety standard as well, and is never exempt.

Fences on top

Moreton Bay adds a fifth trigger that catches many boundary walls: where a fence stands on the wall and the combined height is more than two metres above natural ground, approval is required. A 600 millimetre wall under a standard 1.8 metre paling fence is over that line.

Who gives the approval

Building approval comes from a licensed building certifier, most often a private one, who will want scaled plans. Brisbane also notes that planning approval is a separate question. It is generally not needed where the wall supports filling or excavation of less than one metre, but overlays, small lots and neighbourhood plans can change that.

Under a metre does not mean anything goes. Gold Coast's council words its exemption as a retaining wall up to 1.0 metre high "that is not load bearing", and the whole structure, footings and drainage included, has to sit inside the property boundary. Building over or near a sewer or water main brings in the local water utility as well.

A gardener's note on drainage

Water is the usual enemy of a low garden wall. Held behind the wall, it adds weight the wall was never sized for. A slotted drain at the base, free-draining gravel behind the wall and an outlet that goes somewhere lawful matter more to the life of a low wall than the choice between timber and block.

Who may build it

Licensing follows a separate rule from approval. A wall job valued over $3,300 needs a QBCC licensee. The Structural Landscaping (Trade) class covers retaining walls up to the height that would need engineering certification under a local law; beyond that the wider builder class applies.

Short answers

Does a 1 metre retaining wall need council approval in Queensland?

Not for building approval, provided it is no more than one metre including the retained fill, at least 1.5 metres from any building or other retaining wall, carries no surcharge and is not part of a pool fence. Over one metre, it needs approval from a building certifier.

Do two low terraced walls need approval?

They do if they are within 1.5 metres of each other. The exemption requires each wall to be at least 1.5 metres from another retaining wall, whatever the individual heights.

Is a retaining wall a dividing fence?

No. The Queensland Government's guidance on fences states that retaining walls are not classed as fences under the neighbourhood disputes legislation, so the shared-cost rules for dividing fences do not automatically apply.

Sources

Read in November 2026. Figures and rules change, so follow the links before relying on any of them for a decision.

  1. Brisbane City Council, Build a retaining wall
  2. City of Moreton Bay, Retaining walls
  3. City of Gold Coast, Do your building works need approval
  4. QBCC, Structural landscaping (trade) licence scope
  5. Queensland Government, Your responsibility as a fence owner

Keep reading

This note is general information from the Great Southern Gardens editorial desk and is not legal, building or engineering advice. Spotted an error? Write to changes@greatsoutherngardens.com.